History
United States
NameUSS Washington
NamesakeGeorge Washington (1732-1799)
OrderedBy Act of Congress 13 December 1775
BuilderManuel Eyre, Jehu Eyre, and Benjamin Eyre, Philadelphia, Pennsylvania
Laid down1776
Launched7 August 1776
CompletedNever
CommissionedNever
Fate
  • Scuttled incomplete 2 November 1777
  • Portion above water burned May 1778
  • Bottom salvaged and sold
General characteristics
TypeFrigate
LengthProbably 132 ft 9 in (40.46 m)[1]
BeamProbably 34 ft 6 in (10.52 m)[2] moulded
Depth of holdProbably 10 ft 6 in (3.20 m)[3]
PropulsionSails
Armament26 x 12-pounders guns 10 x 6-pounders guns

USS Washington was a Continental Navy frigate laid down in 1776 but never completed.

Washington was among thirteen frigates authorized to be constructed for the new Continental Navy by an Act of Congress of 13 December 1775, and among four to be built at Philadelphia, Pennsylvania. The act called for all thirteen ships to be ready for sea by March 1776. Official designs were drawn up for the ships, but credit for their design is a matter of dispute, with Joshua Humphreys, John Wharton, and Nathaniel Falconer all being possible designers.[4] In any event, plans had been drawn up and copies made of them by 2 February 1776,[5] too late for the ships to be completed by March 1776.

The design of the 32-gun frigate USS Randolph, also built at Philadelphia under the same construction program, probably to the same design as Washington - the two ships may even have been sisters - provides insight into the design of Washington, which has not survived. Randolph's design appears to have been inspired by British 36-gun frigates of the period. This resulted in a ship with a similar beam and depth of hold to the 36-gun British ships, but longer than the 36-gun frigates of the time, and thus oversized for her rate - much in the way the French Navy built oversized ships at that time. Randolph was planned to be somewhat more lightly built than the British frigates that inspired her design, with a broader frame spacing and a much more raked bow, but with less freeboard.[6]

The thirteen ships were named on 6 June 1776. Washington, built by Manuel Eyre, Jehu Eyre, and Benjamin Eyre, was launched on 2 August 1776. She was not yet completed when British forces advancing on Philadelphia in 1777 during the American Revolutionary War threatened to capture her, and she was scuttled incomplete on 2 November 1777 to prevent capture. The portion of her hull remaining above water was burned 8 May 1778 by a British raiding party.,[7] while her bottom was salvaged and sold in Philadelphia.[8]

Notes

  1. Chapelle, pp. 64 and 557, says that Washington probably had the same dimensions as USS Randolph, and on p. 74 that the ships probably were sisters; he provides these dimensions for Randolph on p. 551
  2. Chapelle, pp. 64 and 557, says that Washington probably had the same dimensions as USS Randolph, and on p. 74 that the ships probably were sisters; he provides these dimensions for Randolph on p. 551
  3. Chapelle, pp. 64 and 557, says that Washington probably had the same dimensions as USS Randolph, and on p. 74 that the ships probably were sisters; he provides these dimensions for Randolph on p. 551
  4. Chapelle, pp. 56-59.
  5. Chapelle, p. 59
  6. Chapelle, pp. 64-65, 74, and 557
  7. "NAVAL DOCUMENTS OF The American Revolution" (PDF). history.navy.mil. Retrieved 17 October 2021.
  8. Chapelle, pp. 74 and 78

References

  • Chapelle, Howard I. The History of the American Sailing Navy: The Ships and Their Development. New York: W. W. Norton and Company, 1949. ISBN 1-56852-222-3.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.