Spray-and-vac cleaning is a “no-touch” method – cleaning is accomplished without the need for workers to touch soiled surfaces with their hands – used in professional cleaning in which a pressurized, diluted cleaning solution is applied to soiled or contaminated surfaces.

Description

To start, a diluted cleaning solution (white vinegar, bleach and detergent) is sprayed onto all surfaces to be cleaned, Using the same machine, the area is then rinsed; this is typically followed by vacuum suctioning that removes the applied liquid along with the suspended solids and dissolved contaminants that have been removed from the surface.[1]

A key advantage of this method over traditional approaches is the ability to deep clean grouted areas (e.g. wall, counter and floor tile) preventing buildup of soil and bacteria in grout lines. Application of a cleaning solution followed by pressurized rinsing and vacuuming removes soil more effectively than methods that rely solely on absorbent wiping (e.g. mopping, microfiber and cleaning cloth use).[1] In addition, studies published by the International Sanitary Supply Association (ISSA) have found that compared to legacy methods these systems potentially reduce cleaning times by 1/3 or more.[2]

Unlike outdoor pressure washers with application pressures of 1,000 – 5,000 pounds per square inch (34,000 kPa), spray-and-vac units are designed for long-term indoor use on grout and other surfaces, and offer variable application pressures ranging from 110 – 500 pounds per square inch (3,400 kPa).

History

The first spray-and-vac system was developed by inventor Robert S. Robinson in 1997. A US Patent was issued in 2001,[3] and the technology has since been licensed by other manufacturers of cleaning equipment. A number of manufacturers in the cleaning industry now produce and market spray-and-vac systems or systems that are similar, and approximately 40,000–50,000 units have been sold worldwide[4] Some systems are battery operated; others do not have vacuuming capabilities however they are still classified under this product category.

Spray-and-vac systems first became popular for restroom cleaning. However, over the years, users of the equipment have found a variety of uses for the equipment, including cleaning chairs and tables in cafeterias, cleaning carpets and hard-surface flooring, and deep cleaning a variety of surfaces.[5]

An emerging market for spray-and-vac systems is public schools where the ability of the units to remove organic soils thoroughly, documented by adenosine triphosphate (ATP) bioluminescence testing, is displacing traditional mop-and-bucket cleaning methods.[6] Correctional and foodservice markets are also appropriate for this method since they typically feature grouted, ceramic tile floors.[7]

Effectiveness

Studies indicate there is not always a high degree of correlation between how clean a surface looks and the levels of contamination actually present. Spray-and-vac systems, are claimed to effectively remove embedded soils and contaminants as well as biological contaminants that are not visible to the naked eye.[8] Such surfaces are typically referred to as “hygienically cleaned”.

Scientific evidence of this is provided through the use of technologies such as adenosine triphosphate (ATP) bioluminescence rapid-monitoring systems. These systems indicate the presence of organic matter that may host harmful microorganisms on a variety of surfaces. In addition to detecting contaminants, ATP systems also provide “proof of service” that an area has been effectively and thoroughly cleaned. According to scientific studies using ATP technology, spray-and-vac systems have been proven to remove more contaminants and disease-causing germs and bacteria on surfaces when compared to conventional mop, bucket, and cloth style cleaning. Additionally, tests show that spray-and-vac systems do not spread contaminants from surface to surface, as can happen when using conventional cleaning methods.[9][10]

References

  1. 1 2 "Cleaning Methods for Ceramic Tile Floors". Controlled Environments. April 2008.
  2. Official 447 Cleaning Times, prepared by Management and published by ISSA Archived 2020-04-18 at the Wayback Machine
  3. Multi-functional cleaning machine Patent #6,206,980 http://www.google.com/patents/about?id=vq8FAAAAEBAJ
  4. Kaivac, http://www.kaivac.com Archived 2009-08-03 at the Wayback Machine, Tennant, http://www.tennantco.com/na-en/products/machines/750-all-surface-cleaner.aspx Archived 2009-02-03 at the Wayback Machine, Hydro, http://www.hydrosystemsco.com/new_ICS8800.asp Archived 2010-07-06 at the Wayback Machine
  5. "Emerging Trends In Hard Floor Care," CMM magazine, April 2009, http://www.cmmonline.com/article.asp?IndexID=6637023%5B%5D
  6. "Measured Results," American School and University magazine, April 2009, http://asumag.com/Maintenance/integrated-cleaning-measurement-schools-200904/index1.html Archived 2009-07-01 at the Wayback Machine
  7. Corrections.com, March 2009, http://www.corrections.com/news/article/20959 Archived 2009-05-04 at the Wayback Machine
  8. "Focus on Tile and Grout Cleaning,” Cleaning & Maintenance Magazine, January 2008, http://www.cmmonline.com/articleprint.asp?print=1&IndexID=6636722%5B%5D
  9. Cleaning Industry Research Institute (CIRI), May 2008, http://www.bsmmag.com/bsmmag/BSMArticle.asp?id=4427 Archived 2011-07-08 at the Wayback Machine
  10. "Soft wash system". Wednesday, 21 September 2022
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.