Southern Pacific 2479
SP No. 2479 undergoing restoration to operating condition in early 2009
Type and origin
Power typeSteam
BuilderBaldwin Locomotive Works
Serial number57228
Build dateOctober 1923
Rebuild date1989–ongoing
Specifications
Configuration:
  Whyte4-6-2
  UIC2'C1'
Gauge4 ft 8+12 in (1,435 mm) standard gauge
Driver dia.73 in (1,854 mm)
Wheelbase75.80 ft (23.10 m)
  Engine35.50 ft (10.82 m)
  Drivers13 ft (4.0 m)
Axle load60,700 lb (27,500 kg)
Adhesive weight180,700 lb (82,000 kg)
Loco weight300,000 lb (136,100 kg)[1]
Tender weight221,900 lb (100,700 kg)
Total weight521,900 lb (236,700 kg)
Fuel typeOil
Fuel capacity4,000 US gal (15,000 L; 3,300 imp gal)
Water cap.12,000 US gal (45,000 L; 10,000 imp gal)
Firebox:
  Grate area52.20 sq ft (4.850 m2)
Boiler pressure200 psi (1.4 MPa)
Heating surface:
  Firebox200.40 sq ft (18.618 m2)
Cylinder size25 in × 30 in (635 mm × 762 mm)
Valve gearWalschaerts
Performance figures
Tractive effort43,660 lbf (194.21 kN)
Factor of adh.4.17
Career
OperatorsSouthern Pacific Railroad
ClassP-10
Number in class6
Numbers
  • SP 2479
DeliveredDecember 1, 1923
RetiredJuly 19, 1956
PreservedSeptember 6, 1958
Current ownerPacific Locomotive Association
DispositionUndergoing restoration to operating condition

Southern Pacific 2479 is one of six 4-6-2 heavy "Pacific" type steam locomotives built by Baldwin Locomotive Works in 1923 for the Southern Pacific Railroad (SP), designated the P-10 class. No. 2479 was retired from service in 1956.[2][3] The locomotive is currently undergoing restoration to operating condition by the Pacific Locomotive Association at Brightside, California.[3]

History

Design and initial use

The six locomotives in No. 2479's class were designed to pull such trains as the Overland Limited between Sparks, Nevada, and Ogden, Utah, a total 568 miles (914 km), without changing engines. Average speed was 35 mph including stops. This would require road speeds of about 60 mph (97 km/h).[3]

Performance proved most satisfactory and thereby set the basic design for all remaining Pacifics built for Southern Pacific Railroad (SP). The Pacific held many long distance assignments including the Daylight Limited between San Francisco and Los Angeles, the Sunset Limited between Los Angeles and El Paso, Texas, and the Sparks to Ogden run. As larger 4-8-2 class locomotives were assigned to these name trains, the 4-6-2 classes were reassigned to local passenger runs between Sacramento and Oakland and the San Francisco-San Jose, California, commuter service. The 2479 ended its service on these routes.No. On August 2, 1941, 2479 was rebuilt at the Southern Pacific Railroad's Bayshore shops increasing its boiler pressure to 210 psi, and its tractive effort to 45,850 lb (20,800 kg).[3]

1937 accident

In February 1937, disaster struck the No. 2479. Pulling a passenger train called "The Owl" and steaming at 70 mph as it approached Selma, California, the locomotive struck a car lodged on the tracks. The impact indirectly caused the locomotive, its tender and seven cars to derail. The engine's pilot was bent on impact with the automobile and caught at the next grade crossing throwing the locomotive off the rails. Both the engineer and the fireman were killed.[3]

Although No. 2479 experienced heavy damage, it was rebuilt and placed back in revenue service.[3]

Preservation

SP 2479’s retirement came on July 19, 1956, as steam locomotion technology was replaced with newer diesel locomotives. No. 2479 was donated and moved to the Santa Clara County Fairgrounds on September 6, 1958, where it became one of three surviving Southern Pacific 4-6-2 steam locomotives, the other two being SP Nos. 2472 and 2467.[3]

Southern Pacific Locomotive 2479 being restored in its cribbing prior to the trucks and wheels being re-installed at the San Jose, CA Fairgrounds.

From 1989 until 2022, the volunteers of the Santa Clara Valley Railroad Association (SCVRRA), and its successor organization, the California Trolley and Railroad Corporation (CTRC), averaged over 5,000 hours per year on the restoration of No. 2479. This amounted to approximately twenty-five person years expended. This represents time spent directly on the locomotive and does not include the many hours spent attempting to raise funds, recruit and train volunteers, and do the administrative tasks that are required of any organization whether for profit or not.[3]

At the end of 1994, the SCVRRA merged with the San Jose Trolley Corporation to form the California Trolley and Railroad Corporation, a not-for-profit educational organization with the mission to preserve historic rail equipment of importance to the history of the Santa Clara Valley and to provide an interpretive venue. One of the underlying reasons for the merger was that the new organization could be a more effective fund raising vehicle.[3]

The previous principal source of funding for the locomotive restoration had been the Santa Clara County Historical Heritage Commission and volunteer fund raising efforts over the years. Approximately, $350,000 had been raised. Of this amount $230,000 represents the cost of the boiler repair done by a professional boiler contractor required by federal and state law. The work on the boiler was begun by Manley Boiler Repair in May 1998. Work continued to progress as 2479's pistons were removed from its cylinders. At the end of October 2008 the CTRC passed a major milestone as No. 2479's front and rear trucks, the 6 main drivers where reinstalled below the locomotive and the locomotive was lowered to the ground for the first time in 15 years.[3][4]

No. 2479 had been displayed at the Santa Clara County Fairgrounds in San Jose, California, and remained at there while undergoing restoration. Under pressure to relocate, the CTRC sought a permanent home for its historic railroad collection for many years, but was unsuccessful. In 2021, CTRC and Pacific Locomotive Association (PLA) announced the locomotive's ownership would be transferred from Santa Clara County to the PLA along with the San Jose roundhouse, turntable, and water tower. The PLA has started to process of relocating this collection to their Niles Canyon Railway in Fremont, California.[5] On August 23, 2022, the locomotive’s boiler was separated from its frame and running gear. Those components were then loaded onto trucks for a short trip to Bonita, CA. The locomotive arrived at its destination the same day, and the boiler, frame, and running gear were reunited. Southern Pacific 1195, a preserved EMD SW900R diesel switcher, coupled to Southern Pacific 2479, and towed it to the Niles Canyon Railway’s Brightside Yard, in Brightside, CA.[3]

See also

References

  1. "www.steamlocomotive.info".
  2. Diebert, Timothy S. & Strapac, Joseph A. (1987). Southern Pacific Company Steam Locomotive Compendium. Shade Tree Books. p. 179. ISBN 0-930742-12-5.
  3. 1 2 3 4 5 6 7 8 9 10 11 "Southern Pacific #2479". Niles Canyon Railway. Retrieved 2023-11-11.
  4. "California Trolley and Railroad Corporation".
  5. "SP 4-6-2, Roundhouse to Move to Niles Canyon". 5 July 2021.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.