Martini-Cadet
TypeCadet training rifle
Place of origin United Kingdom
Service history
In service1891-1955
Used byUnited Kingdom & Australia
Production history
DesignerRSAF Enfield
Designed1891
ManufacturerBSA and W.W. Greener
Produced1891-c.1949
No. builtapprox. 83,000-
Specifications
Mass6 lb 5 oz (unloaded)
Length42in (1250mm)

Cartridge.310 Cadet
Calibre.310 Cadet
ActionMartini Falling Block/Francotte action
Rate of fire10 rounds/minute
Muzzle velocity1,200 ft/s (370 m/s)
Effective firing range300 yd (270 m)
Feed systemSingle shot
SightsSliding ramp rear sights, Fixed-post front sights

The Martini Cadet is a centrefire single-shot cadet rifle produced in the United Kingdom by BSA and W.W. Greener for the use of Australian military Cadets.[1] Although considered a miniature version of the Martini–Henry, the internal mechanism was redesigned by Auguste Francotte to permit removal from the receiver as a single unit. Chambered for the .310 Cadet cartridge (aka: .310 Greener), it was used from 1891 to 1955. They were also sold to the public thereafter, as the BSA No.4, 4a, 4b and 5 in other calibres like the .297/230 and .22 rimfire. The rifles will often chamber the similarly sized .32-20 Winchester and fire with some accuracy.[2] However the 32/20 is actually 0.312 cal and the 310 is 0.323 cal. Due to this 10 thousandths difference the accuracy of a .32/20 round cannot be guaranteed.[3]

After being sold by the Australian government many were converted to sporting or target rifles, often re-barrelled to calibres like .22 Hornet, .218 Bee, .25-20 Winchester, .222 Rimmed, .357 Magnum and others to .22 rimfire by gun makers like Sportco.[4]

See also

References

  1. .Digger History
  2. Martini Gallery
  3. Cartridges of The World by Frank C. Barnes
  4. Rifleman UK
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.