Harmony
Unincorporated community
Harmony, Alberta is located in Alberta
Harmony, Alberta
Location of Harmony in Alberta
Coordinates: 51°06′47″N 114°23′35″W / 51.113°N 114.393°W / 51.113; -114.393
CountryCanada
ProvinceAlberta
Census divisionNo. 6
Municipal districtRocky View County
Plan approved2007
Settled2016
Government
  TypeUnincorporated
  ReeveGreg Boehlke
  Governing body
  • Jerry Arshinoff
  • Rolly Ashdown
  • Margaret Bahcheli
  • Greg Boehlke
  • Liz Breakey
  • Lois Habberfield
  • Bruce Kendall
  • Eric Lowther
  • Earl Solberg
Area
 (2021)[1]
  Land6.92 km2 (2.67 sq mi)
Population
 (2021)[1]
  Total757
  Density109.5/km2 (284/sq mi)
Time zoneUTC−7 (MST)
  Summer (DST)UTC−6 (MDT)
Area code+1-403

Harmony is an unincorporated community within Rocky View County in the Canadian province of Alberta. It is adjacent to the Springbank Airport, approximately 23 km (14 mi) west of downtown Calgary and 10 km (6.2 mi) southeast of the Town of Cochrane. At a planned size of 707 ha (1,750 acres), Harmony is estimated to have a population of 10,000 residents[2] living in 3,500 dwelling units at full build-out.[3]

History

Harmony received planning approval through the adoption of a conceptual scheme by Rocky View County in February 2007, with a neighbourhood plan for the first stage of Harmony subsequently approved in October 2008.[3] In mid-2012, it was anticipated that it would take 15 years to build out the community.[4] Despite its prior planning approvals, the application for the first stage of subdivision in 2012 was met with local resistance.[4] Concerns were expressed by the Springbank Airport Business and Pilots Association over the long-term incompatibility of the community with the pre-existing airport.[4] Specific concerns included safety as well as speculation that future residents would complain about the noise associated with the airport's operations.[4] Other local stakeholders expressed concerns about the impacts Harmony would have on the existing rural community[5] and the loss of farmland.[2] Rocky View County Council approved the subdivision application for the first stage of the community in early July 2012.[5] The community welcomed its first family in 2016.[6] Within two years, it grew to a population of 249.[7]

Demographics

In the 2021 Census of Population conducted by Statistics Canada, Harmony had a population of 757 living in 230 of its 256 total private dwellings, a change of inf% from its 2016 population of . With a land area of 6.92 km2 (2.67 sq mi), it had a population density of 109.4/km2 (283.3/sq mi) in 2021.[1]

Harmony recorded a population of 249 in Rocky View County's 2018 municipal census.[7]

Attractions

Planned amenities in Harmony include a regional park, playfields, greenbelts, a golf course and a recreational lake.[3]

References

  1. 1 2 3 "Population and dwelling counts: Canada and designated places". Statistics Canada. February 9, 2022. Retrieved February 10, 2022.
  2. 1 2 Kimberley Massey (August 20, 2012). "Residents start petition opposing Springbank development". Rocky View Weekly. Great West Newspapers Limited Partnership. Retrieved November 14, 2012.
  3. 1 2 3 "Harmony Conceptual Scheme (Bylaw C-6411-2007)". Municipal District of Rocky View No. 44. January 2007. Archived from the original on August 27, 2011. Retrieved November 14, 2012.
  4. 1 2 3 4 Jenna McMurray (July 2, 2012). "Proposed residential development near Springbank airport draws flak". Calgary Sun. Canoe Sun Media. Archived from the original on June 20, 2015. Retrieved November 14, 2012.
  5. 1 2 Kimberley Massey (July 9, 2012). "Rocky View council gives controversial community green light". Rocky View Weekly. Great West Newspapers Limited Partnership. Retrieved November 14, 2012.
  6. Josh Skapin (June 24, 2016). "The first family of Harmony". Calgary Herald. Postmedia. Retrieved May 12, 2020.
  7. 1 2 "Rocky View County Population by Hamlet" (PDF). Rocky View County. Retrieved May 12, 2020.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.