A suction excavator or vacuum excavator is a construction vehicle that removes heavy debris or other materials from a hole on land.

Description

Suction excavation utilizes high-powered fans to safely excavate up to 141 feet (43 meters) of depth depending on the configuration. First, a small surface area hole of about 10 inches (250 mm) is created. Then, the suction excavator hose removes materials below the surface. Compressed air is used to fracture the ground for the suction excavator to remove the material safely. No manual hand tooling is used in the process.

History of fan-based suction technology

RSP[1] has been making suction excavators and stationary suction units since 1993. Since 2000, RSP developed a new suction principle,[2] the ESE series. These vehicles work with the internationally patented suction principle which guarantees the highest degree of gravity separation, lowest contamination of the filters, and thus consistently high suction performance.

Since 1998, the Mobile Tiefbau Saugsysteme[3] has produced another type of suction excavator. It is said to have a newly designed air flow principle, and thus a considerably improved suction performance compared to MTS's previous designs.

Design and operation

RSP

Since 1993 RSP[1] have produced[4] suction superstructures mounted onto two, three and four-axle vehicles, stationary suction units as well as custom-made machines.

ModelLengthFan
capacity
Suction
negative
pressure
Maximum
suction
depth
Maximum
suction
span
Spoil
tank
volume
Specifications of carrying truck Suction pipe
internal diameter
Intended use
PowerAxlesWheelbaseWeight
City 7.5[5]6.3 m11,300 m3/h – 3813 m3/s15 kPa (0.15 bar)10 m30 m1.1 m3128 kW (172 hp)23.8 m (12 ft; 150 in)7.5 tonnes15 cm (5.9 in)pedestrian areas, narrow streets
ESE 18[6]7.1 m32,000 m3/h – 8.88 m3/s21 kPa (0.21 bar)15 m70 m4 m3210 kW (280 hp)24.2 m (14 ft; 170 in)18 tonnes25 cm (9.8 in)inner-city excavations in confined spaces
ESE 26[7]8.8 m42,000 m3/h – 11.66 m3/s40 kPa (0.40 bar)45 m120 m8 m3230 kW (310 hp)34.2 m (14 ft; 170 in)28 tonnes25 cm (9.8 in)general purpose
ESE 32[8]9.8 m43,000 m3/h – 11.94 m3/s47 kPa (0.47 bar)50 m150 m10 m3300 kW (400 hp)44.2 m (14 ft; 170 in)32 tonnes25 cm (9.8 in)heavy-duty

The suction unit is roughly rectangular-block-shaped, about 2.5 meters wide and 3.6 meters high, and is usually mounted and used on the back of a truck, which must have power takeoffs to run the suction unit's air impeller and hydraulics. When it is emptying its load, the spoil tank lid (with the hose connection) hinges off to the right, and then the spoil tank (with the filters) tips about 90° over to the left to tip out its load.

Possible applications include:

  • Replacement of pipes and fittings
  • Renovation and new installation of gas, water or heating pipes, cables, and sewage lines
  • Exploratory excavations
  • Railway trackside maintenance and repair
  • Use of ground displacement rockets
  • Clearing away environmental damage
  • Replacement of contaminated soil around the roots of trees
  • Removal of material in demolition projects
  • Removal of gravel from flat roofs
  • Cleaning blocked street gutters and gullies
  • Operations involving the use of horizontal boring units
  • Leaf removal
  • Application for special operations

Suction excavators eliminate the need for costly and time-consuming manual labour. Buried pipe systems do not suffer damage. The output is up to sixteen times that achieved by conventional excavation.

In the ESE 32/7:

  • The suction pipe's internal diameter is 25 cm (9.8 in)
  • The fan produces a maximum pressure reduction of about 30 kilopascals (0.30 atm; 4.4 psi). Across a circular suction diameter of 25 centimetres (9.8 in) that gives an entry air speed of about 600 km/h (400 mph) and a maximum suction power of about 150 kg (340 lb). It can suck objects up to 25 cm (9.8 in) across that weigh up to 30 kg (66 lb).
  • Described as able to suck up "earth, stones, vegetable waste, sand, mud, water, pebbles, rubble, asbestos, railway-type ballast".
  • The suction pipe has a detachable extension nozzle narrowing from 25 to 10 centimetres (10 to 4 in) internal diameter, with handles on a rotatable panel to open or close side vents to let the operator drop over-large objects that it has picked up.
  • Expected spoil extraction rates are rough, in cubic metres per hour:
Materialm3/hourTime for 1 m3
heavy soil with buried cables and pipes1.6636 min
dry heavy soil2.524 min
wet heavy soil or clay320 min
moderately heavy soil with buried cables and pipes415 min
muddy soil, gravel, crushed rock610 min
sandy soil106 min
water302 min
heavy soil with buried cables and pipes
excavated by hand
0.254 hours

Mobile Tiefbau Saugsysteme

Mobile Tiefbau Saugsysteme (MTS)[3] in Germersheim (Germany) has produced the following suction excavators since 1998:[9]

ModelFanAir
flow rate
(m3/s)
Suction pressure
(kPa)
Spoil capacity
(m3)
Max. suction depth
(m)
Max. suction distance
(m)
Suction hose diameter
(mm, inch)
Notes
Suction Box SBO[10]1 – 2125 to 200 mm (4.9 to 7.9 in)With 22, 32, 42 kW versions
Mini-Vac[11]Single turbine6.9419.741.5 – 2525200 mm (7.9 in)Buildup on 7.5 ton truck, compact for difficult-to-reach sites
Dino 2–5[12]Single or
double turbine
6.94 – 1033.504 – 1220100250 mm (9.8 in)With telescopic or hydraulic boom
Mega-Vac[13]Quadruple turbine1049.30930200250 mm (9.8 in)For big jobs

With the Mega-Vac the suction power across a 250 mm (9.84 in) wide hose entry would be about 500 kg.

Saugmaster

Saugmaster[14] is a RSP ESE model;[15] it can suck 8 m3/s of air, and its suction tube is 23 cm (9.1 in) wide inside.

History of vacuum-pump-based suction technology

Pacific Tek

Pacific Tek[16] was founded in 1993 and went into the valve exerciser and vacuum excavator industry. Pacific Tek founders have created innovations, such as the Angled Vacuum Excavator Tank (1997) and 180° Swivel Mount Valve Operator (1999).

Ditch Witch

The American firm Ditch Witch makes four models of suction excavators:[17] FX20, FX25, HX30, HX50, FX50, FXT50, FX65, FXT65, and HX65; the number is its approximate horsepower. It is mounted on a semitrailer or rigid truck. It has its own engine (petrol for FX20 & FX25, the others diesel). Its spoils tank is cylindrical with somewhat rounded ends. Its suction hose is 3 to 4 inches diameter inside. Its spoil tank can be various sizes from 150 gallons (570 litres) to (4560 litres.)

Airex

Airex[18] in the UK makes two current models of vacuum excavator: AX-68 and AX-180. Both systems are mounted on the back of rigid 7.5-ton trucks and designed for use in inner-city streets. The smaller design of these trucks gives less impact on their surroundings. The AX-68 uses a 4-inch hose but the AX-180 uses an 8-inch hose which can remove a tonne of earth in six minutes.

Ring-O-Matic

Ring-O-Matic[19] in the U.S. makes several models of gasoline and diesel vacuum excavation units. They offer both trailer-mounted and skid-mounted models. Spoils tanks range in size from 150 gallons up to 2000 gallon tanks.

Vac-Tron Equipment

Vac-Tron Equipment[20] in the U.S. makes more than 50 models of hydroexcavation and dry excavation gasoline and diesel vacuum excavators.

Cappellotto

Cappelotto[21] makes various powered cleansing equipment including Capgeo (a model of suction excavator). Its arm is said to reach 7 meters and to swivel 250 degrees.[22][23][24][25][26][27][28][29][30][31]

They also make Capbora,[32] which is specifically for sucking up loose material. Cappelotto was founded in 1953 and is based at Gaiarine in the province of Treviso in Italy.

The Cappellotto products are also distributed to 40 countries in the world, with KOR Equipment Solutions[33] being the distributor for Australia and New Zealand.

Uses

Suction excavators are useful for removing earth around buried utilities and tree roots with less risk of damaging them than using a conventional excavator with a metal bucket.

This type of excavation is held to be a safe and efficient form of excavation. However, it is unsuitable for archaeological excavation. Using a powerful vacuum and high-pressure water, precise holes, trenches, and tunnels can be cut to the required size and proportion. Because compressed air or water is used to loosen the earth, the risk of damaging underground utilities is less, and contractors can safely find and expose them. Often excavation reveals unknown utilities, saving lives, money, and time.

It is also referred to as "daylighting", as the underground utilities are exposed to daylight during the process.

This type of excavating is quickly becoming recognized as a best practice[34] when working in areas with underground utility congestion and frozen ground. Hydro excavation lessens the risk of damaging utilities, which may be inaccurately mapped, located, or marked on the surface.

A suction excavator is useful in bulk excavation in confined areas, where its suction hose can reach in, over, or through barriers, e.g. digging a swimming pool in a courtyard.

It can be used on railways (perhaps mounted on a railroad car base) to suck old track ballast off the track when re-ballasting the track.

It can be used as a very heavy-duty vacuum cleaner to pick up miscellaneous debris, e, g, rubble, or big accumulations of fallen leaves or litter.

It can suck up liquids, e.g. water from a hollow. In case of opting for air vacuum excavation,[35] the Positive Displacement Blower should be properly checked because it can move great volumes of air and a malfunction can cause a serious accident. When digging on rocky soils, it is better to opt for water instead.

National Grid Gas has ordered ten suction excavators.[36][37]

As of July 2009 in England, the North West Gas Alliance[38] has three German-made suction excavators.

Vacuum-excavation hire provider Utility Site Solutions work with utility and civil engineering companies throughout the UK to provide safer no-dig excavation. Projects include relocating underground utility lines to accommodate wider road lanes and filter lanes, and street works to provide essential maintenance of street lighting.

Utility Site Solutions specialist image library shows various uses of the new excavation technology including bridge refurbishment, clearing culverts, clearance of holding tanks, extension hose excavation, substations. rail excavations, airports, filter beds, lighthouse, and many more applications.[39] Vacuum/suction excavators can excavate up to 140m horizontally and up to 20m depth depending on the type of material being excavated.

Specific jobs

Some significant suction excavation works achieved in Italy by RSP GmbH are the following:

  • In the old center of Venice:
    • Cleaning deep silt (accumulated over nearly 40 years) out of the Rio Terà San Polo, which was formerly a narrow open canal, but is now a roofed sewer under a busy street. The excavator sucked through a long hose. Access damage to its roof and the street above was limited to four manhole-sized holes, which afterward were fitted with manhole covers for future access. This avoided a long smelly traffic-obstruction-causing manual job.
    • Cleaning 1.6 meters deep silt out of the Rio Terà San Leonardo (a roofed sewer, 230 m long, 6 to 13 m wide): similarly.
  • The south loggia of the Palazzo della Ragione in Padua: Sucking out a big accumulation of rubble and dust and bird droppings. The space is roofed by medieval vaulting through which only one small access hole was allowed. A 150-meter-long suction hose was used. (In the accompanying photographs the rubble seems to be largely plaster removed from the walls.)
  • In Siena: removing about 150 m3 of rubble left by building restoration works, which had been dumped in old tunnels cut in tuff.

Vacuum excavation

A suction excavator with vacuum excavation equipment operating in the Netherlands

Vacuum excavation significantly reduces the risk of loss of property and injury to workers associated with contacting or cutting underground utilities, as often happens if backhoe, auger, hand digging, or other mechanical methods are used.

Portable vacuum excavation equipment such as suction excavators can quickly dig small deep precisely-controlled holes to uncover buried utilities. Soft excavation technology can dig around buried pipe or cable without the risk of damage inherent with backhoes, excavators, or other mechanical tools.

Typically, vacuum excavation loosens the soil with a blunt-nosed high pressure air lance or water source and immediately vacuums away loosened material. Air and water, when used appropriately, are far less likely than sharp-edged tools to damage underground structures.

Depending on the machine used and soil conditions, a 12-inch-square 5-foot-deep pothole can be completed in 20 minutes or less. Most models are capable of digging deeper, but utility potholes seldom need to be more than six feet deep.[40]

Vacuum excavation is best used in conjunction with conventional underground (one-call) locating services. Because of a preponderance of overlapping buried utility lines, locating devices often miss some of the buried utilities on a site or cannot completely or accurately mark a site.

According to New Mexico One Call 811: Aligning Change, Locating with Potholing, "One-call paint marks and flags are the first steps in making the process of locating underground utilities safer, the use of vacuum excavation technology adds an additional margin of safety."[41]

Potholing (which here means exposing buried utilities to find where and how deep they are) using vacuum excavation, has made it safer to find underground utilities.

When conventional locating is unworkable due to high densities of buried utilities, potholing can also be used to verify the route of each buried line within the excavation zone. In some cases, the contractor may choose to perform the entire excavation using vacuum excavation.

Today, according to "In the Pipeline" in an article on enewsbuilder.net,[42] "As vacuum excavation technology and techniques for locating underground utilities has become both readily available and affordable, it's already considered by many municipalities as a Best Practice." Many governmental entities and municipalities no longer allow the use of backhoes to find underground utilities, citing the risk of damaging them. Many have ordered the use of vacuum excavation only.

To prevent utility strikes, the use of underground locating services has become the norm, and in most places, is required by law. However, the practice of underground location, while very useful, has its limitations. Locators have been known to miss some of the buried utilities or be unable to completely or accurately mark a site because there are many overlapping buried utility lines.

For these reasons, vacuum excavation can be an effective way to find, with virtually 100% accuracy, all underground structures in an excavation zone. Vacuum excavation is also typically more cost-effective than hand digging.

Through aggressive educational efforts about the safety of vacuum excavation, vacuum excavation is now being mandated in many states and municipalities, and efforts are underway to achieve universal acceptance of vacuum excavation as the preferred technology.

See also

References

  1. 1 2 "en.rsp-germany.com". en.rsp-germany.com. Retrieved 24 June 2014.
  2. "RSP-Germany – Gravity separation". En.rsp-germany.com. Retrieved 24 June 2014.
  3. 1 2 "saugbagger.com". Saugbagger.com. Retrieved 24 June 2014.
  4. "History". RSP-Germany. Retrieved 24 June 2014.
  5. "City 7.5". RSP. Archived from the original on 26 September 2013.
  6. "ESE 18". RSP. Archived from the original on 26 September 2013.
  7. "ESE 26". RSP. Archived from the original on 26 September 2013.
  8. "ESE 32". RSP. Archived from the original on 26 September 2013.
  9. "FNS GmbH |".
  10. "500th Suction Excavator |". 27 January 2016.
  11. "Tozzo AG – Unser Angebot". Tozzo.ch. Retrieved 24 June 2014.
  12. "Tozzo AG – Dispositionsdaten". Tozzo.ch. Retrieved 24 June 2014.
  13. "pacific-tek.com". pacific-tek.com. Retrieved 16 December 2014.
  14. "Vacuum Excavation". Ditch Witch. Archived from the original on 4 May 2009. Retrieved 31 October 2018.
  15. "airexgb.co.uk". Airexgb.co.uk. Retrieved 24 June 2014.
  16. "ring-o-matic.com". ring-o-matic.com. Retrieved 24 June 2014.
  17. "vactron.com". vactron.com. Retrieved 24 June 2014.
  18. "cappellotto.com". Cappellotto. Retrieved 24 June 2014.
  19. "La nuova frontiera dello scavo". www.cappellotto.com (in Italian). Archived from the original on 18 April 2011. Retrieved 19 July 2011.
  20. "Image". Cappellotto. Archived from the original on 27 March 2012. Retrieved 19 July 2011.
  21. "Info tecniche". www.cappellotto.com (in Italian). Archived from the original on 18 April 2011. Retrieved 19 July 2011.
  22. "Image". www.cappellotto.com. Archived from the original on 27 March 2012.
  23. "Image". www.cappellotto.com. Archived from the original on 27 March 2012. Retrieved 19 July 2011.
  24. "Image". www.cappellotto.com. Archived from the original on 27 March 2012. Retrieved 19 July 2011.
  25. "Image". w.cappellotto.com. Archived from the original on 27 March 2012. Retrieved 19 July 2011.
  26. "Image". Archived from the original on 27 March 2012. Retrieved 19 July 2011.
  27. "Image". www.cappellotto.com. Archived from the original on 27 March 2012. Retrieved 19 July 2011.
  28. "Image". Cappellotto. Archived from the original on 27 March 2012.
  29. "Aspirazione alla massima potenza". www.cappellotto.com (in Italian). Archived from the original on 2 October 2011. Retrieved 19 July 2011.
  30. "Homepage". KOR Equipment Solutions. Retrieved 24 June 2014.
  31. "ORCGA Underground Infrastructure Damage Prevention Best Practices Guide v4.0 (See 4-19 and 4-28)". Archived from the original on 7 October 2011. Retrieved 24 June 2014.
  32. "Tips to know about Vacuum Excavation". Mills Catoggio Excavations Services.
  33. "News – Tracto-Technik Gmbh & Co. Kg". Tracto-technik.com. Retrieved 24 June 2014.
  34. "Excavator Rock Saw". Retrieved 24 April 2023.
  35. nwgasalliance.co.uk Archived 20 April 2009 at the Wayback Machine
  36. "Take a look at what we do. See our Vac Truck machines in action and understand the possibilities". Archived from the original on 24 October 2011. Retrieved 30 November 2011.
  37. Griffin, Jeff. Underground Construction. Oildom Publishing, 2001.
  38. 2009 New Mexico 811 Magazine. Published by ACTS Now, Inc.
  39. enewsbuilder.net Archived 20 November 2008 at the Wayback Machine
  40. Smoltczyk, Ulrich (20 January 2003). Geotechnical Engineering Handbook, Procedures – Google Books. John Wiley & Sons. ISBN 9783433014509. Retrieved 24 June 2014.
  41. http://www.marigraph.com/projects/saugbagger/videos/saugbagger_vid_01.avi

Media related to Suction excavators at Wikimedia Commons

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.