Aero 3
Aero 3 - Letalski center Maribor
Role Military trainer
National origin Yugoslavia
Manufacturer UTVA
First flight August 1956
Introduction 1958
Primary user Yugoslavia
Number built 110

The UTVA Aero 3 was a piston-engined military trainer aircraft built in Yugoslavia to replace the Ikarus Aero 2 then in service. One hundred ten were built, in Yugoslav Air Force service from 1958 to mid-1970s.[1] It was superseded by the UTVA 75.

First May 1960 in Ljubljana Aero 2 and Aero 3 aircraft

Design and development

First flown in 1956[2] the Aero 3 was designed to meet a Yugoslav Air Force requirement for a primary trainer that could also be used in the army co-operation role.[2]

The Aero 3 was a low wing cantilever monoplane that seated the student and instructor in tandem under a bubble canopy.[2] Of all wood construction it had a fixed, tailwheel landing gear and powered by a nose-mounted 190 hp (142 kW) Lycoming O-435-A piston engine.[2]

Former military operators

Aircraft on display

Serbia

A UTVA Aero 3 prototype and UTVa Aero 3 are on display

Specifications

Data from [2]

General characteristics

  • Crew: 2 a teacher and student
  • Capacity: 2
  • Length: 8.58 m (28 ft 1 in)
  • Wingspan: 10.5 m (34 ft 5 in)
  • Height: 2.7 m (8 ft 10 in)
  • Wing area: 18.9 m2 (203 sq ft)
  • Gross weight: 1,198 kg (2,646 lb)
  • Powerplant: 1 × Lycoming O-435-A piston engine , 142 kW (190 hp)

Performance

  • Maximum speed: 230 km/h (143 mph, 124 kn)
  • Cruise speed: 180 km/h (112 mph, 97 kn)
  • Range: 680 km (422 mi, 367 nmi)
  • Service ceiling: 4,300 m (14,100 ft)

See also

Aircraft of comparable role, configuration, and era

References

Notes

  1. Ugolok Neba
  2. 1 2 3 4 5 Orbis 1985, page 36

Bibliography

  • The Illustrated Encyclopedia of Aircraft (Part Work 1982–1985). Orbis Publishing.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.