In chemistry, electron counting is a formalism for assigning a number of valence electrons to individual atoms in a molecule. It is used for classifying compounds and for explaining or predicting their electronic structure and bonding.[1] Many rules in chemistry rely on electron-counting:

Atoms are called "electron-deficient" when they have too few electrons as compared to their respective rules, or "hypervalent" when they have too many electrons. Since these compounds tend to be more reactive than compounds that obey their rule, electron counting is an important tool for identifying the reactivity of molecules. While the counting formalism considers each atom separately, these individual atoms (with their hypothetical assigned charge) do not generally exist as free species.

Counting rules

Two methods of electron counting are "neutral counting" and "ionic counting". Both approaches give the same result (and can therefore be used to verify one's calculation).

  • The neutral counting approach assumes the molecule or fragment being studied consists of purely covalent bonds. It was popularized by Malcolm Green along with the L and X ligand notation.[2][3] It is usually considered easier especially for low-valent transition metals.
  • The "ionic counting" approach assumes purely ionic bonds between atoms.

It is important, though, to be aware that most chemical species exist between the purely covalent and ionic extremes.

Neutral counting

  • This method begins with locating the central atom on the periodic table and determining the number of its valence electrons. One counts valence electrons for main group elements differently from transition metals.
E.g. in period 2: B, C, N, O, and F have 3, 4, 5, 6, and 7 valence electrons, respectively.
E.g. in period 4: K, Ca, Sc, Ti, V, Cr, Fe, Ni have 1, 2, 3, 4, 5, 6, 8, 10 valence electrons respectively.
  • One is added for every halide or other anionic ligand which binds to the central atom through a sigma bond.
  • Two is added for every lone pair bonding to the metal (e.g. each Lewis base binds with a lone pair). Unsaturated hydrocarbons such as alkenes and alkynes are considered Lewis bases. Similarly Lewis and Bronsted acids (protons) contribute nothing.
  • One is added for each homoelement bond.
  • One is added for each negative charge, and one is subtracted for each positive charge.

Ionic counting

  • This method begins by calculating the number of electrons of the element, assuming an oxidation state
E.g. for a Fe2+ has 6 electrons
S2− has 8 electrons
  • Two is added for every halide or other anionic ligand which binds to the metal through a sigma bond.
  • Two is added for every lone pair bonding to the metal (e.g. each phosphine ligand can bind with a lone pair). Similarly Lewis and Bronsted acids (protons) contribute nothing.
  • For unsaturated ligands such as alkenes, one electron is added for each carbon atom binding to the metal.

Electrons donated by common fragments

LigandElectrons contributed
(neutral counting)
Electrons contributed
(ionic counting)
Ionic equivalent
X12X; X = F, Cl, Br, I
H12H
H10H+
O24O2−
N36N3−
NR322NR3; R = H, alkyl, aryl
CR224CR2−2
Ethylene22C2H4
cyclopentadienyl56C5H5
benzene66C6H6

"Special cases"

The numbers of electrons "donated" by some ligands depends on the geometry of the metal-ligand ensemble. An example of this complication is the M–NO entity. When this grouping is linear, the NO ligand is considered to be a three-electron ligand. When the M–NO subunit is strongly bent at N, the NO is treated as a pseudohalide and is thus a one electron (in the neutral counting approach). The situation is not very different from the η3 versus the η1 allyl. Another unusual ligand from the electron counting perspective is sulfur dioxide.

Examples

  • CH4, for the central C
neutral counting: C contributes 4 electrons, each H radical contributes one each: 4 + 4 × 1 = 8 valence electrons
ionic counting: C4− contributes 8 electrons, each proton contributes 0 each: 8 + 4 × 0 = 8 electrons.
Similar for H:
neutral counting: H contributes 1 electron, the C contributes 1 electron (the other 3 electrons of C are for the other 3 hydrogens in the molecule): 1 + 1 × 1 = 2 valence electrons.
ionic counting: H contributes 0 electrons (H+), C4− contributes 2 electrons (per H), 0 + 1 × 2 = 2 valence electrons
conclusion: Methane follows the octet-rule for carbon, and the duet rule for hydrogen, and hence is expected to be a stable molecule (as we see from daily life)
  • H2S, for the central S
neutral counting: S contributes 6 electrons, each hydrogen radical contributes one each: 6 + 2 × 1 = 8 valence electrons
ionic counting: S2− contributes 8 electrons, each proton contributes 0: 8 + 2 × 0 = 8 valence electrons
conclusion: with an octet electron count (on sulfur), we can anticipate that H2S would be pseudo-tetrahedral if one considers the two lone pairs.
  • SCl2, for the central S
neutral counting: S contributes 6 electrons, each chlorine radical contributes one each: 6 + 2 × 1 = 8 valence electrons
ionic counting: S2+ contributes 4 electrons, each chloride anion contributes 2: 4 + 2 × 2 = 8 valence electrons
conclusion: see discussion for H2S above. Both SCl2 and H2S follow the octet rule - the behavior of these molecules is however quite different.
  • SF6, for the central S
neutral counting: S contributes 6 electrons, each fluorine radical contributes one each: 6 + 6 × 1 = 12 valence electrons
ionic counting: S6+ contributes 0 electrons, each fluoride anion contributes 2: 0 + 6 × 2 = 12 valence electrons
conclusion: ionic counting indicates a molecule lacking lone pairs of electrons, therefore its structure will be octahedral, as predicted by VSEPR. One might conclude that this molecule would be highly reactive - but the opposite is true: SF6 is inert, and it is widely used in industry because of this property.
  • TiCl4, for the central Ti
neutral counting: Ti contributes 4 electrons, each chlorine radical contributes one each: 4 + 4 × 1 = 8 valence electrons
ionic counting: Ti4+ contributes 0 electrons, each chloride anion contributes two each: 0 + 4 × 2 = 8 valence electrons
conclusion: Having only 8e (vs. 18 possible), we can anticipate that TiCl4 will be a good Lewis acid. Indeed, it reacts (in some cases violently) with water, alcohols, ethers, amines.
neutral counting: Fe contributes 8 electrons, each CO contributes 2 each: 8 + 2 × 5 = 18 valence electrons
ionic counting: Fe(0) contributes 8 electrons, each CO contributes 2 each: 8 + 2 × 5 = 18 valence electrons
conclusions: this is a special case, where ionic counting is the same as neutral counting, all fragments being neutral. Since this is an 18-electron complex, it is expected to be isolable compound.
neutral counting: Fe contributes 8 electrons, the 2 cyclopentadienyl-rings contribute 5 each: 8 + 2 × 5 = 18 electrons
ionic counting: Fe2+ contributes 6 electrons, the two aromatic cyclopentadienyl rings contribute 6 each: 6 + 2 × 6 = 18 valence electrons on iron.
conclusion: Ferrocene is expected to be an isolable compound.


See also

References

  1. Parkin, Gerard (2006). "Valence, Oxidation Number, and Formal Charge: Three Related but Fundamentally Different Concepts". Journal of Chemical Education. 83 (5): 791. Bibcode:2006JChEd..83..791P. doi:10.1021/ed083p791. ISSN 0021-9584. Retrieved 2009-11-10.
  2. Green, M. L. H. (1995-09-20). "A new approach to the formal classification of covalent compounds of the elements". Journal of Organometallic Chemistry. 500 (1–2): 127–148. doi:10.1016/0022-328X(95)00508-N. ISSN 0022-328X.
  3. "MLXZ". www.columbia.edu.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.